Sliding windows for wide openings and tight exteriors
A slider moves horizontally along a track, so nothing projects outside the wall. That single fact decides most of the openings it gets used in, anywhere a swinging sash would hit a walkway, deck rail, driveway or air conditioner.
Limited lifetime warranty, transferable · Custom-built to your opening · Family owned and operated
Where sliding windows suit a home
Sliders suit wide, low openings, which describes most of the window walls in the postwar bungalows and side-splits across North York, Scarborough and Etobicoke. A wide casement needs heavy hardware and a lot of swing clearance; a wide slider needs neither.
Every operating model we install tilts inward for cleaning, so both faces of the glass can be reached without going outside. On a second storey that is the difference between cleaning your own windows and hiring someone.
The trade-off is honest: a slider seals less tightly than a casement, because the sash has to stay loose enough to run in its track. On a sheltered wall the difference is negligible. On an exposed one it is not.
Features
- Sashes tilt inward so both sides of the glass are cleaned from indoors
- Nothing projects outward, safe over decks, walkways and driveways
- End-vent layout keeps a wide, uninterrupted view through the fixed centre pane
- Lift-out models remove completely for maintenance or moving furniture
- Low-E glass with argon fill available across the collection
Models we fit
| Model | Style | Description |
|---|---|---|
| VS1 | Single slider-tilt | One operating sash slides horizontally and tilts inward for cleaning. |
| VX1 | Double slider-tilt | Both sashes operate and both tilt inward. |
| VS3 | End-vent slider | Fixed centre pane with operating sashes at each end. |
| VL1 | Lift-out slider | Sash lifts inward and out of the track entirely. |
| VL3 | Lift-out end-vent slider | End-vent layout with lift-out sashes. |
How they compare
Against a casement: the casement seals tighter and opens fully; the slider projects nothing and handles width better. On a wall exposed to prevailing wind, choose the casement.
Against a hung window: mechanically the same idea rotated 90 degrees. Hung windows suit tall, narrow openings and traditional facades; sliders suit wide, short ones. On a heritage street a hung window is usually the correct look.
End-vent versus double slider: the end-vent gives a much better view because the middle is one clear pane, but the two operating sashes are narrower. Pick end-vent when the view matters, double slider when airflow does.
What is the difference between a casement window and a slider?
A casement window is hinged at the side and cranks outward, while a slider moves horizontally along a track. Casements seal tighter because the sash compresses against the frame when closed, which suits exposed walls and windy sites. Sliders cost less to operate and suit wide openings where a projecting sash would obstruct a walkway, deck or driveway.
How do I know when it is time to replace my windows?
Replace a window when the sealed unit has fogged, the frame has rotted or warped, or the sash no longer closes and locks properly. Persistent drafts, ice on the interior frame in winter, and condensation trapped between the panes all point to a failed unit rather than a repairable one. Difficulty opening a window is a safety issue where the opening serves as bedroom egress.
How long does window installation take?
Most whole-home window replacements are finished in one to three days. A single window typically takes 45 to 90 minutes from removal to trim and cleanup. The size of the job, the number of openings and whether exterior capping is involved set the pace. We confirm the schedule when you approve the quote, and the crew cleans and removes all old units before leaving.
Book your free in-home consultation
We measure every opening, talk through the options that suit your home, and give you a written quote. No pressure, no obligation.